Beach Flag Bases & Ground Spikes — Cross, Water-Fillable, Steel Plate & Car Bases
Seven flag pole bases, each drawn and measured from the production tooling. Choose by the ground you stand on, the pole diameter you run and the wind the display has to survive — then we confirm net weight, spindle type and export carton data before you commit.

T3 360° Rotatable Flat Iron Cross Base — 80 cm, 3.8 kg
The default choice for hard ground. An 80 cm flat iron cross carries a 360° rotating spindle, so the flag swings with the wind instead of twisting against the pole. At 3.8 kg net it is heavy enough for forecourts and retail car parks, yet still folds flat for shipping and shelf storage.
- Model
- T3 — 360° rotatable flat iron cross base
- Span
- 80 cm across the folded arms
- Net weight
- 3.8 kg per base
- Spindle
- 360° rotating, replaceable bearing
- Finish
- Powder-coated black flat iron; silver on request

T2 Economical Folding Cross Base — 82 cm, 0.9 kg
A wide 82 cm cross at just 0.9 kg — the economy option when a complete beach flag kit has to ship cheaply and set up indoors or on sheltered paved ground. The folding arms collapse into a slim carton, which is why this model is the usual pick for mail-order kits and short promotional runs.
- Model
- T2 — economical folding cross base
- Span
- 82 cm extended
- Net weight
- 0.9 kg per base
- Construction
- Folding silver-grey steel arms with a central spindle
- Best for
- Indoor displays, sheltered hard ground, kit bundles

T19 Premium Handle Water Fillable Base — 46 × 46 cm
A moulded 46 × 46 cm tank with an integrated carry handle and a 13.5 cm 360-type spindle. It ships empty so freight stays low, then fills with water or sand on site for the working weight a windy forecourt needs. The handle and stackable shell make it the practical choice for car dealerships and outdoor retail.
- Model
- T19 — premium handle water fillable base
- Footprint
- 46 × 46 cm square tank
- Spindle
- 360 type, 13.5 cm bearing
- Fill
- Water or sand on site; ships empty
- Handling
- Moulded carry handle, stackable shell

T9 Economical Simple Shaft Iron Base — 30 × 30 cm, 4 kg
A 30 × 30 cm solid steel plate with a 7.5 cm shaft and a die-cut carry slot. Four kilograms in a small footprint gives permanent outdoor displays the stability a folding cross cannot, without the bulk of a water tank. It is the model to specify when a display stays in one place for a season.
- Model
- T9 — economical simple shaft iron base
- Plate
- 30 × 30 cm square steel
- Shaft height
- 7.5 cm fixed shaft
- Net weight
- 4 kg per base
- Handling
- Die-cut carry slot in the plate

T6 360° Rotatable Ground Socket — 50 cm, 1 kg
A 50 cm galvanised steel ground socket with a 360° rotating head, built for grass, sand and soft soil where a cross base has nothing to grip. One kilogram per unit keeps a beach or sports-field shipment light, and the rotating head stops the fabric wrapping around the pole.
- Model
- T6 — 360° rotatable ground socket
- Length
- 50 cm galvanised steel stake
- Net weight
- 1 kg per socket
- Head
- 360° rotating socket with sleeve
- Ground
- Grass, sand, soil, beach and sports fields

T11 U-Shaped Car Base — 50 cm
A 50 cm U-shaped steel frame that slides under a vehicle tyre — the base mobile promotions and car forecourts use when there is no time or permission to bolt anything down. The 13.5 cm bearing takes a standard flag pole, and the whole unit lifts away at the end of the day.
- Model
- T11 — U-shaped car base
- Frame
- 50 cm U-shaped steel, tyre-anchored
- Bearing
- 13.5 cm pole bearing
- Installation
- No drilling, no ballast — park on the frame
- Best for
- Mobile promotions, forecourt displays, events

T16 Large Pipe Insert Base — 75 cm, 1.5 kg
A 75 cm T-bar insert base with a 3 cm pipe sleeve, made for larger-diameter poles and in-ground socket systems. At 1.5 kg it is the lightest way to hold a wide pole on prepared hard ground, and it pairs with permanent sleeves where displays are set up and taken down daily.
- Model
- T16 — large pipe insert base
- Span
- 75 cm T-bar
- Insert
- 3 cm pipe sleeve
- Net weight
- 1.5 kg per base
- Best for
- Large-diameter poles, permanent ground sleeves

Flag base sizes, net weights & spindle types.
Every dimension below is taken from the production drawings. Use it to shortlist a base before requesting a quotation — we then confirm the exact spindle fit, carton dimensions and gross weight for your quantity. Fillable bases ship empty; working weight depends on the water or sand added on site.
| Model | Type | Size / span | Net weight | Spindle | Best ground & use |
|---|---|---|---|---|---|
| T3 flat iron cross | Cross base | 80 cm span | 3.8 kg | 360° rotating | Hard ground, forecourts |
| T2 folding cross | Cross base | 82 cm span | 0.9 kg | Fixed / rotating | Indoor, short-term kits |
| T19 water tank | Fillable tank | 46 × 46 cm | Ships empty | 360 type, 13.5 cm | Windy outdoor, car dealers |
| T9 iron plate | Steel plate | 30 × 30 cm, 7.5 cm shaft | 4 kg | Fixed shaft | Permanent outdoor |
| T6 ground socket | Ground spike | 50 cm stake | 1 kg | 360° rotating | Grass, sand, beaches |
| T11 car base | Tyre-anchored | 50 cm U-frame | Confirm per order | 13.5 cm bearing | Mobile, forecourt |
| T16 pipe insert | Insert sleeve | 75 cm, Ø 3 cm | 1.5 kg | Sleeve insert | Large-diameter poles |
Match the base to the ground, not to the flag.
Most flag failures are base failures. A light cross tips on an exposed forecourt, a heavy plate is wasted freight on indoor tile, and a fixed spindle tears the hem once the wind turns. Shortlist by surface first, then by pole size and wind exposure.
T3 flat iron cross (3.8 kg) for everyday use, T9 steel plate (4 kg) for permanent or exposed sites, T2 folding cross (0.9 kg) when freight weight decides the order.
T6 rotating ground socket. A cross base has nothing to grip in sand; a 50 cm stake driven into the ground holds the same flag at a tenth of the packed volume.
T19 water-fillable tank. Shipped empty to keep freight economical, then filled on site to the working weight the location needs.
T11 U-shaped car base — tyre-anchored, no drilling, no ballast to carry. For larger poles on prepared hard ground, T16 with its 3 cm insert sleeve.
Pairing with poles? See the beach flag pole range for pole lengths, materials and the export packing list. Every base above fits our standard spindle system unless noted.
Bearings, spindles, pole feet & full accessory sets.
Bases, rotating bearings, spindles, pole feet, water bags, ground plates and carry cases can be ordered on their own or bundled with a container of poles. That is how distributors keep a replacement programme running without reordering complete flag kits.


Also available: powder-coated black or silver finishes, galvanised ground sockets, wall brackets, toppers and spare 360° bearings. Ask for the spare parts list with your enquiry.
The 9-type accessory index: water bag bases, ground screws & wall mount flag bases.
The overview photo at the top of this page shows nine numbered bases and accessories. Here is the same list as a crawlable spec table — click any number to jump straight to the row, then quote that item as a spare or as part of a complete pole-and-flag kit. Sizes are transcribed exactly as printed on the drawing; where no dimension is printed, we confirm it with your quotation rather than guess.
| No. | Accessory & search term | Size on drawing | Typical application | Order as |
|---|---|---|---|---|
| 01 | Grey cross basegrey cross flag base · 80 cm folding cross | 80 × 3 × 12 cm | Hard ground, tiled floors, retail entrances | Base only / pole kit |
| 02 | Spike base50 cm flag pole ground spike | Length 50 cm | Grass, sand, beaches, sports fields | Base only / pole kit |
| 03 | Water bagwater bag base · water fillable ballast | Ø 50 cm | Extra ballast on cross bases in windy forecourts | Spare / weight ballast |
| 04 | Black cross baseblack cross base · compact folding stand | 60 × 5 × 12 cm | Indoor displays, compact hard-ground sites | Base only / pole kit |
| 05 | Square basesquare steel flag base · 30 × 30 plate | 30 × 30 × 0.5 cm | Permanent outdoor sites, forecourt plates | Base only |
| 06 | Iron car basecar tyre flag base · drive-on stand | 50 cm | Car forecourts, mobile promotions | Base only |
| 07 | Ground screwground screw anchor · earth auger base | Length 55 cm | Soil, lawns, semi-permanent installations | Base only / pole kit |
| 08 | Carry bagflag pole carry bag · kit transport case | Confirm per order | Transport and storage of pole, base and flag sets | Spare / kit add-on |
| 09 | Wall basewall mount flag base · façade bracket | Confirm per order | Shopfronts, façades, wall-mounted flag displays | Spare / kit add-on |
The nine items above follow the numbered overview drawing (grey cross 80 × 3 × 12 cm, black cross 60 × 5 × 12 cm, square 30 × 30 × 0.5 cm). The seven model sections and comparison chart earlier on this page come from their individual production drawings — two reference sets, kept separate so nothing is mixed up. Pair any item with beach flag poles, or ask for the full spare parts list. Packing, artwork and kit assembly are handled in one workshop.
From ground surface to carton data.
- 01 / Tell us the siteHard ground, grass, sand or vehicle-side — plus pole length and flag area. We recommend the lightest base that still holds.
- 02 / Confirm the spindleFixed, 360° rotating or sleeve insert. Match it to the pole diameter so the whole order fits one system.
- 03 / Approve a sampleA base sample with confirmed net weight and finish, normally within 7 days.
- 04 / Confirm the shipmentDouble-wall cartons with cardboard interleaves, net and gross weight, carton dimensions and fill volume marked for fillable models.
Flag bases for forecourts, beaches & events.
Water-fillable tanks and tyre-anchored car bases that survive traffic and daily set-up.
50 cm rotating ground sockets driven into sand or turf.
Flat iron crosses and steel plates on polished indoor floors.
U-shaped car bases and folding crosses that travel with the kit.
Bearings, spindles, pole feet and bases sold separately or bundled with poles.
Matched base, pole and flag sets packed to your carton specification.
Completing a display kit? See custom flags & banners, canopies & outdoor, table flags and beach flag poles. Base selection, artwork handling and export packing are managed by the same team — see how we work.
Flag bases FAQ.
- Which flag base do I need for a 4.5 m beach flag pole?
- It depends on the ground first. On concrete or tile, the T3 flat iron cross (80 cm, 3.8 kg) with a 360 degree rotating spindle is the usual choice; for a permanent or exposed site, the T9 steel plate (30 x 30 cm, 4 kg). On grass, sand or a beach, use the T6 50 cm rotating ground socket. On a windy forecourt, the T19 water-fillable tank. Send the pole length, flag size and surface and we confirm the match.
- What is the difference between a cross base and a water-fillable base?
- A cross base carries a fixed dead weight — 0.9 kg on the T2 folding cross, 3.8 kg on the T3 flat iron cross — folds flat and ships cheaply. A water-fillable tank such as the T19 (46 x 46 cm) ships empty to keep freight low, then takes on water or sand on site to reach the working weight an exposed site needs. Choose a cross base for portability and low freight, a fillable tank for wind.
- Do 360 degree rotating spindles really matter?
- Yes. A rotating head lets the flag swing with the wind instead of wrapping around the pole and tearing at the hem. The T3 cross base, T6 ground socket and T19 tank all use rotating spindles; the T19 uses a 360 type 13.5 cm bearing. Bearings are replaceable and sold separately, so a distributor can service a display without replacing the whole base.
- Can I buy bases without poles, or order spare parts separately?
- Yes. Bases, rotating bearings, spindles, pole feet, water bags, ground plates and carry cases can be ordered alone or bundled with a container of poles. Match the spindle to your pole diameter when ordering so the whole shipment fits one system, and ask for the spare parts list with your enquiry.
- Are water-fillable bases shipped filled?
- No, they ship empty to keep freight economical. Fill volume and the resulting gross weight are marked on the carton, so your customer knows the working weight before filling. Fill with water for temporary displays or sand where a heavier, non-draining ballast is needed.
- Are flag bases powder-coated, and what is the MOQ?
- Standard finishes are powder-coated black and silver, with galvanised ground sockets. MOQ is 100 pcs per design for standard finishes.
Send the pole length and the ground surface. We'll return the base spec.
Model, net weight, spindle type, finish, sample lead time and export carton data — everything your purchasing file needs, with no guesswork and no overselling on weight.