ONE-STOP FLAGS & DISPLAYS SINCE 2015  ·  7 PRODUCT LINES  ·  60+ EXPORT MARKETSjames@tuyuandisplay.com  ·  +86 177 5398 8552  ·  EN
WhatsApp
TX-CB80  ·  BASES & ACCESSORIES

T3 Flat Iron Cross Base, 80 cm, 360° Rotating

The base that stops a beach flag tipping and stops the pole chewing through the flag hem — a 2.83 kg flat iron cross with a bearing that lets the whole flag turn with the wind.

80 cmCROSS SPAN
2.83 kgUNIT WEIGHT
360°ROTATING SPINDLE
Powder-coatedBLACK STEEL
T3 flat iron cross flag base, 80 cm span, black powder-coated with 360 degree rotating spindleTX-CB80 · factory photo, unit may vary with options
80 cmCROSS SPAN
2.83 kgUNIT WEIGHT
360°ROTATING SPINDLE
Powder-coatedBLACK STEEL
01  TECHNICAL DATA

Specification

Need a spec sheet as PDF? →

Product

Model code
TX-CB80 (T3)
Type
Flat iron cross base
Cross span
80 cm
Surface
Powder-coated black; silver on request
Ground
Hard ground, paving, indoor floors
Weight per base
2.83 kg
Spindle
360° rotating spindle, pole held upright in wind
HS code (indicative)
7326.90
Minimum order
100 pcs per design
Production lead time
25 – 35 days

Packing & logistics

Packing
Double-wall carton, cardboard interleave between bases
Spares
Replacement bearings and spindles can be bundled
Bases per carton
10 pcs
Carton dimensions
83 × 26 × 17 cm
Gross weight per carton
30 kg
Carton volume
0.037 CBM
Approx. 20GP load
762 cartons ≈ 7,620 pcs (volume-limited)
Container planning

Mixed containers are welcome. Send the model mix and destination port and we return a 20GP / 40HQ loading plan with gross weight per carton before you commit.

02  WHERE IT SELLS

Typical applications

  • Beach flag sets on paving, concrete and showroom floors
  • Car dealership and fuel station forecourts
  • Shopping mall and exhibition hall displays
  • Indoor retail promotions where drilling is not allowed
03  ORDER & SAMPLING

How this model runs

Sample
Printed sample in 7 days by express, cost deducted from the bulk order
Artwork
AI or PDF at 150 dpi minimum, digital proof in 24 hours
Production
25 – 35 days after proof approval for 5,000 pcs
Payment
T/T with 30% deposit, balance against copy of B/L
COMPARE THE RANGE

Other models in Bases & Accessories.

See all bases & accessories →

Quote TX-CB80 in 12 hours

The model code is already attached. Add quantity, destination port and print requirements.

Goes straight to our sales inbox. Prefer WhatsApp? Message us here.

05  FAQ

Before you order TX-CB80.

Why does the rotating spindle matter?

A fixed spindle makes the flag twist around a stationary pole, which wears the sleeve and tears the hem in wind. A bearing-mounted spindle lets the flag and pole turn together with the wind, so the fabric keeps its shape.

Will a 2.83 kg base hold a 4.5 m flag?

On hard ground and in normal conditions yes — the low centre of the cross and the 80 cm span do the work. For exposed coastal sites we recommend the heavier version or a fillable tank; tell us the site and we advise.

Can the base be galvanised instead of powder-coated?

Yes, galvanised finish is available on request for sites near salt water, with a small cost difference and a longer lead time.

Do you supply the pole with the base?

Either way. Most orders combine 4.5 m poles with this base as a set; base-only repeat orders are equally welcome.

One quote for the whole product range.

Send the product lines, quantity and destination port — we reply with a consolidated quotation, carton data and a production slot.